2 Way Solenoid Valve

Product Specifications:

Product Description:
GENERAL FEATURES

• Wide pressure range, flow rate and orifis options.

• Solenoid valves are used with filters.

• Solenoid valves can be mounted in any positionwithout affecting its operation.

• Coil to be used in a vertical position.

ELECTRICAL CHARACTERISTICS

• Continuous Duty : ED %100Coil
• Insulation Class : H (180°C)(IEC 85)
• Coil Impregnation : Polyester Fiber
• GlassAmbient Temperature : -10°C, +60°C
• Protection Degree : IP65 (ISO 60529)
• On request; IP68Electric Plug
• Connection : DIN 46340 3-Poles
• Connector (DIN 43650)Connector
• Specification : ISO 4400 / EN 175301-803 Form A,Spade Plug (Cable Ø6-8 mm)
• Electrical Safety : IEC 335
• Standard Voltages : AC 12V 15VA, 24V 15VA, 48V 15VA,230V 15VA, 230V 24VADC 12V 18W, 24V 18W, 48V 18W, 110V 18W On request other voltages
• Voltages Tolerance : AC -15%, +10% DC -5%, +10%
• Frequency : 50 Hz (60 Hz…)On request; Connector with LED, PWM Socket Specifycoil voltage with order

Product Specifications:

Product Description:
Specifications:

Product Specifications:

Product Description:
Features:

• Wide pressure range, a flow rate and orifice options.
• Solenoid valves are used with the filter.
• Solenoid valves can be mounted in any position without affecting its operation.
• Coil to be used in a vertical position.

Product Specifications:

Product Description:
Features:

• Suitable for non-aggressive liquids (water, light oil (2E) et), gaseous fluids (air, inert gases etc.)
• Not suitable for use with dangerous fluids listed in Group 1
• Minimum operating pressure differential 0,5 bar
• High reliability, quality and performance, long life, corrosion resistance
• Wide pressure ratings, range of flow rate and orifice options
• Ideal for the automatic control of media in a wide range of applications.
• TORK solenoid valves satisfy relevant 97/23/EC, Pressure Equipment Directive (PED) and 2006/95/EEC Low Voltage Directive (LVD).
• Coils interchangeable
• Flow factor Kv of each valve is indicated, so that the flow Q can be calculated as a function of pressure
• Solenoid valves must be used with filtered fluids.
• Solenoid valve can be mounted in any position without affecting operation, vertical with coil upwards preferred.
• Standard pipe connection is G (BSP) (ISO 228-1) and on request, other pipe connections are available (NPT (ANSI 1.20.3)).

Product Specifications:

Product Description:
Features:

• Wide pressure range, flow rate and orifis options.
• Solenoid valves are used with filters.
• Solenoid valves can be mounted in any position
• Without affecting its operation. coil to be used in a vertical position.

Specification:

Product Specifications:

Product Description:
Tork series S8510 (N.C ) and S8511 (N.O ) pinch solenoid valves are 2/2 way normally closed and normally open.

Features:

• TORK series S8510 (N.C ) and S8511 (N.O ) pinch solenoid valves are 2/2 way normally closed and normally open
• The tubing is the only material in contact with the fluid
• Fluid not in contact with metal parts
• Suitable for media without producing neither turbulent flows nor dead spaces.Liquids, water, agressive media etc.
• High flow rate under the same conditions of internal diameter of different solenoid valves
• Valves are suitable for soft silicone tubings or others similar as to elasticity and hardness (50 Shore A )
• Tubing are not inculed in our supply
• Compact and low weight valve enabling easy and quick installation
• High reliability, quality and performance
• Flow factor Kv of each valve is indicated, so that the flow Q can be calculated as a function of pressure
• Solenoid valves must be used with filtered fluids.
• Solenoid valve can be mounted in any position without affecting operation ; vertical with coil upwards preferred.
• If the soft tubings are different from the ones indicated, it’s important that the tubing maximum wall thickness is the same as shown in the table.
• In case the tubings is not placed in its seat the solenoid valve could operate incorrectly