TYPES OF Drain Valves

Product Specifications:

Product Description:
Wide range of S8180 (TORK-GZ.DV) Drain Solenoid Valves which is well known in market for their superior function as well as features. Flexible time setting for various conditions makes compressed air loss to almost negligible. Our drain solenoid valves comes with timers and assure higher performance.

Features:

• TORK series 58180 (NC) diaphragm drain solenoid valves are 2/2 way normally closed pilot operated.
• The standby and drainage periods can be regulated by the timer on itself. It is attached to the part of the valve which it is drained.
• The valve is opened to drain on time which the timer is programmed.
• On request; normally open types Suitable for non-aggressive liquids (water, light oil (2E) etc.), gaseous fluids (air, inert gases etc.)

Specifications:

Product Specifications:

Product Description:
GENERAL FEATURES

•  The standby and drainage periods can be regulated by the timer onitself. It is attached to the part of the valve which is drained. The valve isopened to drain on time which the timer is programmed.
• On request; normally open types
• Suitable for non-aggressive liquids (water, light oil (2E) etc… ), gaseousfluids (air, inert gases etc…)
• Working temperature: -10°C / +80°C
• Not suitable for use with dangerous fluids listed in Group 1
• Don’t require any differential pressure to operate
• Compact and low weight valve enabling easy and quick installation
• High reliability, quality and performance; long life, corrosion resistance
• Wide pressure ratings, range of flow rate and orifice options
• On request; solenoid valve can have 1 mounting hole at the bottom ofthe body.
• Ideal for the automatic control of media in a wide range of applications.
• TORK solenoid valves satisfy relevant 97/23/EC. Pressure EquipmentDirective (PED) and 2006/95/EEC Low Voltage Directive (LVD)
• Some applications; separator main drainage
• Coils interchangeable
• Flow factor Kv of each valve is indicated, so that the flow O can becalculated as a function of pressure
• Solenoid valves must be used with filtered fluids.
• Solenoid valve can be mounted in any position without affectingoperation; vertical with coil upwards preferred.
• Standard pipe connection is G (BSP) (ISO 228-1) and on request; otherpipe connections are available (NPT (ANSI 12031)

ELECTRICAL CHARACTERISTICS

• Continuous Duty : ED 0Coil
• Insulation Class : H (180°C)Coil
• Impregnation : Polyester Fiber Glass
• Coil Encapsulation Material : Fiber Glass ReinforcedAmbient
• Temperature : -10°C, +60°C
• Protection Degree : P 65 (EN 60529) with coil duly fitted withthe plug connector
• Electric Plug Connection : DIN 46340 3-Poles Connector (DIN 43650)
• Connector Specification : ISO 4400 / EN 175301-803 Form A,Spade Plug (Cable Ø6-8 mm)
• Electrical Safety : IEC 335
• Standard Voltages : For AC 12V, 24V, 48V, 11DV, 230VFor DC 12V, 24V, 48V, 110 VOn request other voltages
• Voltages Tolerance : AC -15%, +10% DC -5%, +10%
• Frequency : 50 Hz, other frequencies on request; (60 Hz)On request; connector with LED Specify coil voltage with order

Product Specifications:

Product Description:
Electronic Condensate Drain With Digital Level Control

The new series of LogiDrain level drains has been designed to solve the problem of condensation water drainage from production plants and compressed air distribution systems. The specific technology applied permits a controlled drainage of condensation water without any compressed air leaks.

LogiDrain is equipped with an integrated storage tank inside which a level sensor has been mounted and is controlled by an intelligent electronic circuit based on an 8-bit microprocessor logic. All drain functions are displayed on a control panel. A test button is available on the control panel for manual drainage.

Product Specifications:

Product Description:
Auto Drain Valves are used to remove accumulated water particles from the air line equipments.

Features:

• Duel timer, solenoid operator.
• Dual Timer Pilot Air operator.
• Dual Timer solenoid operator high pressure.
• Mechanical float type.
• Single timer, solenoid operated.
• Zero air loss/ float type.
• High discharge, pilot air operator.

Product Specifications:

Product Description:
We are dealing in SCB Srl for Electronic condensate drains with digital level control.

Products : LD 100, LD 101, LD 101 Compact, LD 200, LD 200L, LD 202, LD 202L, LD 203, LD204

Product Specifications:

Product Description:
We are dealing in SCB Srl for Electronic condensate drains with digital level control.

Products : LD 100, LD 101, LD 101 Compact, LD 200, LD 200L, LD 202, LD 202L, LD 203, LD204

Product Specifications:

Product Description:
We provide a high quality of High Pressure Drain Valve.