TORK Series S8510 (NC) And S8511 (NO) Pinch Solenoid Valves

Product Specifications:

Brand	Tork
Series	S8510 / S8511 Series
Coil Voltage	AC 12V, 24V, 48V, 110V, 230V
Frequency	50 Hz
Pinch Device	POM
Core Tube	SS
Coil Insulation Class	H (180 Deg C)
Continuous Duty	ED %100
Protection Class	IP65
Temperature	-10 to 60 Deg C
Application	Air,Water,Acid,Oil,Hygenic Liquids,Corrosive Mediums
Connection Size	6,7,8,9 mm Soft Rubber Pipe
Tube and Internal Parts	Stainless Steel
Body Material	Anodized Aluminum
Position	Normally Closed

Product Description:

General Features:

TORK series S8510 (NC) and S8511 (NO) pinch solenoid valves are 2/2 way normally closed and normally open
The tubing is the only material in contact with the fluid
Fluid not in contact with metal parts
Suitable for media without producing neither turbulent flows nor dead spaces.Liquids, water, agressive media etc.
High flow rate under the same conditions of internal diameter of different solenoid valves
Valves are suitable for soft silicone tubings or others similar as to elasticity and hardness (50 Shore A )
Tubing are not included in our supply
Compact and low weight valve enabling easy and quick installation
High reliability, quality and performance
Solenoid valves must be used with filtered fluids.
Solenoid valve can be mounted in any position without affecting operation vertical with coil upwards preferred.
If the soft tubings are different from the ones indicated, it’s important that the tubing maximum wall thickness is the same as shown in the table