Tork S4030 Series Fuel Oil Solenoid Valve
Product Specifications:
| Brand | Tork |
| Frequency | 50 Hz |
| Connector Specification | ISO 4400 / EN 175301-803,Form A,Spade plug (Cable dia. 6-8 mm ) |
| Electrical Safety | IEC 335 |
| Voltage Tolerances | For AC %-15 ; %+10,For DC %-5 ; %+10 |
| Standard Voltages | 230V For DC 12V,For AC 12V,110 V Other voltages on request,48V,110V,24V |
| Electric Plug Connection | DIN 46340 3-poles connectors (DIN 43650) |
| Ambient Temperature | From -10 deg C +60 deg C |
| Continuous Duty | ED %100 |
| Coil Insulation Class | H (180 deg C) |
| Coil Impregnation | Polyester Fiber Glass |
| Coil Encapsulation Material | Fiber Glass Reinforced |
| Protection Degree | IP 65 (EN 60529) with coil duly fitted with the plug connector |
Product Description:
Features:
- New design·
- Full orifice fuel oil solenoid valves·
- Suitable for non-aggressive liquids (fuel oil, hydraulic oil, light oil (2E)), overheated water and steam.
- Not suitable for use with dangerous fluids listed in Group 1 .
- Minimum operating differential pressure 0,35, 0,5 .
- High reliability, quality and performance; long life, corrosion resistance .
- Wide pressure ratings, range of flow rate and orifice options.
- Ideal for the automatic control of media in a wide range of applications.
- TORK solenoid valves satisfy relevant 97/23/EC, Pressure Equipment Directive (PED) and 2006/95/EEC Low Voltage Directive (LVD).
- Some applications, burners · Coils interchangeable .
- Flow factor Kv of each valve is indicated, so that the flow Q can be calculated as a function of pressure.
- Solenoid valves must be used with filtered fluids.
- Solenoid valve can be mounted in any position without affecting operation, vertical with coil upwards preferred.
- Standard pipe connection is G (BSP) (ISO 228-1) and on request; other pipe connections are available (NPT (ANSI 1.20.3)))