Irrigation Solenoid Valve
0.5 Bar To 10 Bar S8990 (TORK-GPP) Irrigation Solenoid Valves
Product Specifications:
| Brand | Tork |
| Pressure | 0.5 Bar to 10 Bar |
| Application | Parks, Gardens, Green Houses, Agricultural Irrigation |
| Series | S8990 Series |
| Size | 3/4″ to 2″ BSP (on request NPT) |
| Coil Voltage | 6 V to 230 V |
| Temperature | -10 to 50 Deg C |
| Seals | NBR |
| Protection Class | IP67 |
| Position | Normally Closed |
| Body Material | Reinforced Nylon |
| Tube and Internal Part | Stainless Steel |
Product Description:
General Features:
- For irrigation systems
- Full orifice solenoid valves
- Big connection sizes
- Suitable for water and air
- Working Temperature: -10°C / +50°C
- Not suitable for use with dangerous
- fluids listed in Group 1
- Minimum operating differential
- pressure 1 bar
- High reliability, quality and performance; long life
- Wide range of flow rate and orifice options
- On request; flanged types
- Ideal for the automatic control of media in a wide range of applications.
- Coils interchangeable
- Flow factor Kv of each valve is indicated, so that the flow Q can be calculated as a function of pressure
- Solenoid valves must be used with filtered fluids.
- Solenoid valve can be mounted in any position withoutaffecting operation; vertical with coil upwards preferred.
- Standard pipe connection is G (BSP) (ISO 228-1)
0.5 To 10 Bar TORK Series S8910 Diaphragm Irrigation Solenoid Valves
Product Specifications:
| Brand | Tork |
| Usage/Application | Parks, Gardens, Green Houses, Agricultural Irrigation |
| Pressure | 0.5 to 10 Bar |
| Size | 3/4″ to 2″ BSP (on request NPT) |
| Coil Voltage | 6 V to 230 V |
| Body Lining | Reinforced Nylon |
| Temperature | -10 to 50 Deg C |
| Seals | NBR |
| Protection Class | IP67 |
| Position | Normally Closed |
| Tube and Internal Part | Stainless Steel |
Product Description:
TORK Series S8910 diaphragm irrigation solenoid valves are 2/2 way normally closed and pilot operated. They are made of efficient design. Advanced technology plastics make the valves strong, with very low maintenance. Made from synthetic elastomers, stainless steel and plastics resistant to corrosion.
General Features:
- Both the efficient design and the advanced technology plastics they are made of, make the valves strong, with very low maintenance.
- Made from synthetic elastomers, Stainless Steel and plastics resistant to corrosion.
- They work in a wide range of pressure
- Manual override in all the valves with internal draining.
- Progressive opening and shut off that prevents water hammer to
- 12-24 voltages for AC and DC or 6-12V Latching type are available
- Very low head loss with high flows
- Easy maintenance.Total Access to the internal parts from the cover of the valve
- Wide range of possibilities such as electric valves, pressure regulating etc.
- These valves can be use electric remote control, farm and gardening irrigation,advanced computerized can be used for irrigation, level control, filtration systems, fertilization systems, environmental control
- Working Temperature: -10°C / +50°C
- Not suitable for use with dangerous fluids listed in Group 1
- Minimum operating differential pressure 0,3 bar
- Flow factor Kv of each valve is indicated, so that the flow Q can be calculated
- as a function of pressure
- Solenoid valves must be used with filtered fluids.
- Solenoid valve can be mounted in any position without affecting operation;
- vertical with coil upwards preferred.
- Standard pipe connection is G (BSP) (ISO 228-1) and on request; other pipe
- connections are available (NPT (ANSI 1.20 3))