Tork Up To 16 Bar S1000 Servo Assisted Series Solenoid Valve

Product Specifications:

Brand Tork
Size 3/8″ to 2″
Pressure Up to 16 Bar
Media Air, Water, Gas
Series S1000 SERIES
Coil Voltage 12 V, 24 V, 48 V, 110 V, 230 V
Seals NBR,on Request EPDM,VITON
Position Normally closed
Protection Class IP65,IP68 (Coil under water application 72 hours up to 10 meter) and Exproof Models
Body Material Brass
Tube Material SS
Temperature Range -10 to 60 Deg C

Product Description:

General Features:

  • Wide pressure range, flow rate and orifis options.
  • Solenoid valves are used with filters.
    Solenoid valves can be mounted in any position without affecting its operation, coil to be used in a vertical position
  • No pressure difference is required.

TORK S1000 Series selenoid valves working without Pressure difference, ∇P=0 Bar, are also named as Zero Series Solenoid Valves.

Application Areas:

In the cases when the system is closed and the inlet and outlet pressures have no difference.

It should be paid attantion that the Inlet and Outlet pressure difference is minimum zero bar and maximum 16 bar.
For example:
Think of a line with below pressure values;
P1 Inlet Pressure = 2 Bar,
P2 Outlet Pressure = 2 Bar
Pressure difference P1-P2 = 0 Bar. S1000 Series Solenoid valves are fitting this case.