- Home
- Products
- Compressed Air Treatment
- Activated Carbon Filters
Compressed Air Filtration
Activated Carbon Filters for Compressed Air
Activated carbon filters remove oil vapour and odour that pass through coalescing filters in gaseous form. They use a bed of activated carbon to adsorb vapour and are normally installed after the dryer, because damp air reduces carbon capacity.
- Adsorbs oil vapour and odour from compressed air
- Installed after the adsorptive dryer for best effect
- Not for liquid oil or aerosol removal
- Flow table based on rated working pressure, with correction factors for other pressures
- Part of a pre-filter, dryer and after-filter train

Application-first selection
Tell us the medium, range and conditions — we match the product type to the duty.
Multi-category sourcing
Instruments, valves, filters, pneumatics and pumps on one enquiry.
Quotation against your specs
Every quote references the parameters you sent, so comparisons are like-for-like.
Engineer-to-engineer support
Ask a technical question before you commit to a model.
Compressed Air Filtration
Range, specifications & options
They are not meant for liquid oil or aerosols, so a good pre-filter and regular maintenance are important. Flotronics can supply carbon filters with the pre-filters and dryers they depend on. Send us your flow rate, working pressure and air quality target and we will recommend a suitable filter and quote. Confirm specifications against the datasheet for your exact model before ordering.
Need a quote for Activated Carbon Filters?
Send the model or your operating parameters — unsure of a value? Mark it unknown and we will help. Monday to Saturday, 10:00 AM – 5:30 PM.
Product Details:
Oil vapor can easily get through the coalescing filters in a state of gaseous, so the adsorptive filter must provide large activated carbon adsorption bed. Because the damp air will reduce the adsorptive ability of the activated carbon, the adsorptive filter usually installed after the adsorptive dryer, in order to guarantee effective removal of oil vapor and peculiar odor. it’s not used to remove the liquid oil or aerosols, thus poor maintenance and lack of pre-filter will accelerate its invalidation.
The flow rate below is the treatment capacity of compressed air under rated working pressure 7 barg (100psi g)
For application in other working pressure, please refer to the correction factors.
Description:
| MODEL | PIPE SIZE | FLOW RATES | QTY | DIMENSION | ||||
|---|---|---|---|---|---|---|---|---|
| L/S | M3/min | SCFM | W | D | H | |||
| VKB010 | RC1/2" | 16.7 | 1 | 35.5 | 1 | 96 | 79 | 252 |
| VKB020 | RC3/4" | 25 | 1.5 | 53 | 1 | 96 | 79 | 252 |
| VKB030 | RC3/4" | 30 | 1.8 | 63.6 | 1 | 96 | 79 | 286 |
| VKB040 | RC1" | 33.3 | 2 | 71 | 1 | 96 | 79 | 286 |
| VKB060 | RC1" | 60 | 3.6 | 127 | 1 | 138 | 111 | 357 |
| VKB070 | RC1" | 83.3 | 5 | 177 | 1 | 138 | 111 | 458 |
| VKB080 | RC1-1/2" | 125 | 7.5 | 265 | 1 | 138 | 111 | 458 |
| VKB090 | RC2" | 166.7 | 10 | 353.1 | 1 | 174 | 142 | 558 |
| VKB100 | RC2-1/2" | 216.7 | 13 | 459 | 1 | 174 | 142 | 558 |
| VKB110 | RC2" | 283.3 | 17 | 600 | 1 | 174 | 142 | 838 |
| VKB120 | RC2-1/2" | 316.7 | 19 | 671 | 1 | 174 | 142 | 838 |
| VKB130 | RC3" | 416.7 | 25 | 883 | 1 | 220 | 184 | 645 |
| VKB140 | RC4" | 466.7 | 28 | 989 | 1 | 220 | 184 | 645 |
| VKB150 | RC3" | 683.3 | 41 | 1448 | 1 | 220 | 184 | 902 |
| VKB160 | RC4" | 800 | 48 | 1695 | 1 | 220 | 184 | 902 |
| Technical Equipments | Maxi.operating pressure: 16 bar | |||||||
| Maxi. operating temperature: 80*C | ||||||||
| Mini. operating temperature:1.5*C |
CONNECTION FACTOR:
| Pressure | Bar | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Psi | 15 | 29 | 44 | 59 | 73 | 87 | 100 | 116 | 131 | 145 | 160 | 174 | 189 | 203 | 219 | 232 | |
| Correction factor | 0.38 | 0.53 | 0.65 | 0.76 | 0.85 | 0.93 | 1 | 1.07 | 1.13 | 1.19 | 1.23 | 1.31 | 1.36 | 1.41 | 1.46 | 1.51 |
Net Weight: 1.04KG
Inner Box Size: 31.5*13.0*13.5cm
Selection guide
What to specify for an accurate quotation
These parameters decide which variant suits your duty. Send what you know — unknown values can be marked for engineering assistance.
Typical applications
- Food and beverage packaging air
- Pharmaceutical and laboratory air
- Paint spraying and finishing
- Instrumentation air
- Breathing air pre-treatment systems
FAQ
Frequently asked questions
Answers to the questions buyers most often ask before requesting a quotation.
Why is the carbon filter fitted after the dryer?
Moist air reduces the adsorption capacity of activated carbon, so the filter works best on dried air. Placing it after the dryer helps it remove oil vapour and odour effectively.
Can an activated carbon filter remove liquid oil?
No. It is intended for oil vapour and odour. Liquid oil and aerosols should be removed upstream by coalescing filters, otherwise the carbon saturates quickly and fails early.
How do I know when the element needs replacing?
Replacement depends on inlet oil load, flow and operating hours. A rise in odour or oil vapour downstream indicates saturation. Share your duty and we can suggest an inspection and replacement approach.
What details do you need to quote a carbon filter?
Send the air flow, working pressure, pipe size, upstream filters and dryer type, and the air quality you need downstream. We will recommend a model and quote.
Related
Related products & guides
Need to remove oil vapour from compressed air?
Send us the media, size, pressure and temperature, connection and quantity for a quotation, or ask our engineers to help you select the right option.